$INPUT SELECT button (pages 27 and 30)
This button is used to switch the input signals from the connected equipment.
%AUTO SETUP button (pages 27 and 31)
If this button is pressed while a RGB signal is being projected, the position of the image and the settings for “DOT CLOCK” and “CLOCK PHASE” will be adjusted automatically.
&Illumination sensor (page 42)
This sensor detects the luminance when the “DAYLIGHT VIEW” function is operating. Do not cover the projector and do not place any object on the projector when using it.
'LAMP indicator (page 58)
This indicator illuminates when it is time to replace the lamp unit. It flashes if a circuit abnormality is detected.
(TEMP indicator (page 57)
This indicator illuminates if an abnormally high temperature is detected inside the projector or around it. If the temperature rises above a certain level, the power supply will be turned off automatically and the indicator will flash.
)PC INPUT indicator
This indicator illuminates when a signal is being input to the connector (PC 1 IN or PC 2 IN) selected using the input select buttons.
*Arrow (FGI and H) buttons (page 38)
These buttons are used to select and adjust items in the
+ENTER button (page 38)
This button is used to accept and to activate items selected in the
,MENU button (pages 36 and 38)
This button is used to display the menu screen. When a menu screen is being displayed, this button can be used to return to a previous screen or to clear the screen.
-POINTER button (page 35)
This button is used to display a pointer on the projected images.
.PAGE buttons
These buttons are used when the projector is controlled by means of a wireless network. Refer to the accessory
/INDEX WINDOW button (page 34)
This button can be used to split the image projection area into a still picture and a moving picture. You can also select this function from the
0MULTI-LIVE SELECT button (PT-LB50NTE only)
This button is used when the projector is controlled by means of a wireless network. Refer to the accessory
(continued on next page)
