NOTE:
BsRGB is only enabled when RGB signals are being input (when “LAMP POWER” is set to “STANDARD”, “AI” is set to “OFF”, and “DAYLIGHT VIEW” is set to “OFF”).
DAYLIGHT VIEW
This adjusts the vividness of the projected images when the projector is used under bright lighting.
AUTO
The vividness of the projected images will be adjusted according to the lighting condition of the room.
OFF
“DAYLIGHT VIEW” is disabled.
NOTE:
B“AUTO” may not function correctly if any objects are placed on the projector.
B“AUTO” will be disabled when “INSTALLATION” in the “OPTION” menu is set to “REAR/DESK” or “REAR/CEILING”.
AI
ON
The lamp is controlled according to the input signals to project images with the best quality.
OFF
“AI” is disabled.
NOTE:
B“AI” is disabled when “LAMP POWER” is set to “ECO- MODE”. (Refer to page 50.)
DETAILED SETUP
You can adjust the picture quality of the projected images in detail. Press the ENTER button to display the “DETAILED SETUP” menu.
WHITE BALANCE
RED/GREEN/BLUE
(RGB only)
This is used to adjust the white areas of the picture if they appear colourised.
To make the selected colour lighter:
Ibutton
To make the selected colour stronger:
Hbutton
