![](/images/new-backgrounds/1149342/149342115x1.webp)
| LAMP indicator |
| ||
|
|
|
| |
Indicator | Illuminated (red) | Flashing (red) | ||
display | ||||
|
|
| ||
|
|
|
| |
| It is nearly time to | An abnormality has been detected in the lamp | ||
Problem | replace the lamp | circuit. |
| |
| unit. |
|
| |
|
|
|
| |
| B Does “REPLACE | B The power may | B There may be an | |
Possible | LAMP” appear on | have been turned | abnormality in the | |
the screen after | on straight away | lamp circuit. | ||
cause | ||||
the projector is | after it was turned | B The lamp unit may | ||
| ||||
| turned on? | off. | be blown. | |
|
|
|
| |
| B This occurs when | B Wait for a while | B Disconnect the | |
| the operation time | until the lamp unit | mains lead by | |
| for the lamp unit is | cools down before | following the | |
| nearing 1 800 | turning the power | procedure on | |
| hours (when | back on again. | page 28, and then | |
| “LAMP POWER” |
| contact an | |
| has been set to |
| Authorised | |
Remedy | “STANDARD” and |
| Service Centre. | |
when “AI” has |
| B Ask your dealer or | ||
|
| |||
| been set to |
| an Authorised | |
| “OFF”). Ask your |
| Service Centre to | |
| dealer or an |
| replace the lamp | |
| Authorised |
| unit. (page 60) | |
| Service Centre to |
|
| |
| replace the lamp |
|
| |
| unit. (page 60) |
|
| |
|
|
|
|
NOTE:
BBe sure to disconnect the mains lead by following the procedure given in “Turning off the power” on page 28 before carrying out any of the procedures in the “Remedy” column.
BIf the TEMP indicator is illuminated and the power turns off after the procedures in the “Remedy” column have been carried out, it means an abnormality has occurred. Please contact an Authorised Service Centre so that the necessary repairs can be made.