Displaying the pointer (POINTER)
You can display the pointer on the projected images.
Projector control panel
Press the POINTER button.
BA pointer will be displayed in the middle of the projected image.
BPress the POINTER button to cancel the pointer display.
Moving the pointer
Press the FGIH buttons to move the pointer.
<Remote control unit>
The pointer will move in 8 directions as shown below.
<Projector control panel>
The pointer will move in 4 directions as shown below.
You can select the pointer in “POINTER SELECT” from 3 types (refer to page 50).
Pointer1 Pointer2 Pointer3
Useful functions
NOTE:
BThe pointer cannot be displayed when a menu screen is being displayed.
