GENERAL SAFETY RULES — FOR ALL BATTERY OPERATED TOOLS

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS.

Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

WORK AREA

TOOL USE AND CARE

1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

3.Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect oth- ers in the work area from debris such as chips and sparks. Provide barriers or shields as needed.

ELECTRICAL SAFETY

4.Do not abuse the cord. Never use the cord to carry the tool. Keep cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately. Damaged cords may create a fire.

5.A battery operated tool with integral batteries or a separate bat- tery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery.

6.Use battery operated tool only with specifically designated bat- tery pack. Use of any other batteries may create a risk of fire.

PERSONAL SAFETY

7.Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use tool while tired or un- der the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious per- sonal injury.

8.Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from mov- ing parts. Loose clothes, jewelry, or long hair can be caught in mov- ing parts.

9.Avoid accidental starting. Be sure switch is in the locked or off position before inserting battery pack. Carrying tools with your finger on the switch or inserting the battery pack into a tool with the switch on invites accidents.

10.Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

11.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable better control of the tool in unex- pected situations.

12.Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

13.Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

14.Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

15.Do not use tool if switch does not turn it on or off. A tool that cannot be controlled with the switch is dangerous and must be re- paired.

16.Disconnect battery pack from tool or place the switch in the locked or off position before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

17.Store idle tools out of reach of children and other untrained per- sons. Tools are dangerous in the hands of untrained users.

18.When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, or a fire.

19.Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edge are less likely to bind and are easier to control.

20.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s opera- tion. If damaged, have the tool serviced before using. Many acci- dents are caused by poorly maintained tools. Do not use a damaged tool. Tag damaged tools “Do not use” until repaired.

21.Use only accessories that are recommended by the manufac- turer for your model. Accessories that may be suitable for one tool may create a risk of injury when used on another tool.

SERVICE

22.Tool service must be performed only by qualified repair person- nel. Service or maintenance performed by unqualified personnel may result in a risk of injury.

23.When servicing a tool, use only identical replacement parts. Fol- low instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury.

page 2

Page 1 Page 3
Page 2
Image 2
StreamLight 6267-20 manual Work Area Tool USE and Care, Electrical Safety, Personal Safety, Service
Page 1 Page 3

6267-20 specifications

The StreamLight 6267-20 is a robust and versatile tactical flashlight designed primarily for law enforcement, military personnel, and outdoor enthusiasts. With its combination of advanced technology, practical features, and durable construction, it stands out as a reliable tool for any situation where high-performance illumination is required.

One of the main features of the StreamLight 6267-20 is its impressive lumen output. With a maximum brightness of 800 lumens, this flashlight provides a powerful beam that can reach distances of up to 600 feet, making it ideal for long-range visibility in dark environments. The light also has multiple brightness settings, allowing users to adjust the output according to their specific needs. In addition to the high setting, it includes a medium and low setting, as well as a strobe function for signaling or disorienting potential threats.

The StreamLight 6267-20 utilizes C4 LED technology, known for its exceptional efficiency and longevity. This LED technology ensures that the flashlight operates for extended periods without sacrificing brightness. The lens is made from toughened glass, providing excellent protection against impacts and scratches while ensuring a clear and focused beam.

Durability is one of the defining characteristics of the StreamLight 6267-20. Constructed from high-quality aluminum with an anodized finish, this flashlight is both lightweight and sturdy. It is designed to withstand harsh conditions, featuring an IPX4 rating for water resistance and a drop-resistant design that can endure falls from significant heights.

The user-friendly design of the StreamLight 6267-20 is another highlight. It features a tactical tail switch that allows for quick and easy operation, even in stressful situations. The flashlight can be easily activated with one hand, facilitating seamless transitions between different lighting modes.

Additionally, the StreamLight 6267-20 is equipped with a rechargeable battery, eliminating the need for frequent battery replacements and ensuring that users are always prepared. The included charging cradle offers a convenient solution for maintaining battery life.

In conclusion, the StreamLight 6267-20 is an outstanding flashlight that excels in performance, durability, and versatility. Its powerful illumination, sturdy construction, and user-friendly features make it an excellent choice for professionals and outdoor enthusiasts alike, ensuring reliability in moments that count.
Top Page Image Contents