![](/images/new-backgrounds/1260683/2606835x1.webp)
SPECIFIC SAFETY RULES
1.Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.
2.WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
•lead from
•crystalline silica from bricks and cement and other masonry products, and
•arsenic and chromium from
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
Symbology
| Volts Direct Current | |
|
| |
SPM | No Load Revolutions per | |
Minute | ||
| ||
|
| |
| Properly Recycle Nickel | |
| Cadmium Batteries | |
|
| |
| Underwriters | |
| Laboratories, Inc. | |
|
|
Specifications
Catalog | Volts | No Load |
No. | DC | RPM |
|
|
|
12 | 1700 | |
|
|
|
FUNCTIONALDESCRIPTION
1.
2. | Transparent blade cover |
| 10 |
3. | Blade | 11 | 9 |
|
|
4.Shoe
5.Orbital action selector lever
6.Tilt angle scale
7.Hex key
8.Vacuum manifold
9. | Battery pack | 1 |
10. | Release butttons |
|
11. | On/Off switch | 8 |
|
| 2 |
7
6
3 | 4 | 5 |
| ||
|
|
DESCRIPTION
The MILWAUKEE 12 Volt Orbital Action Jig Saw can cut a wide variety of materials including metal, wood, and plastic. Cuts may be straight lines, bevels curves or internal
•Rapid blades change without tools with the
•Adjustable Orbital Action blade stroke cuts faster by pressing the blade against the work only during upstroke. This is particularly effective when rough cutting thick wooden boards.
•Adjustable shoe can tilt up to 45° in either direction for bevel cuts.
•
•Transparent blade cover improves dust extraction.
•Vibration dampened mechanism permits quieter, smoother running.
page 3