OPERATION

WARNING!

To reduce the risk of injury, wear safety goggles or glasses with side shields.

Wood

III

Metal

0

Plastic

I

Smooth Cut

0

Starting and stopping the tool

1.To start the tool, push the On/Off switch forward until “I” is visible.

2.To stop the tool, push the On/Off switch backwards until “0” is visible.

NOTE: Orbital action may be adjusted whether the tool is running or not.

General cutting

1.Set the stroke and orbital action according to the material to be cut.

Adjusting the orbital action

The amount of orbital action may be adjusted with the selector lever. In general, a large orbital action (III) should be used with soft materials and a small orbital action (I) should be used with hard materials. When a smooth cut is required, no orbit (0) should be used. Recommended orbit settings for different material compositions are shown below. The opti- mum orbital action should be determined by the user for their specific cutting requirements.

2.Position the tool with the front part of the shoe on workpiece and turn on tool.

3.Hold the machine firmly against the workpiece and guide it along the desired cutting line. Do not feed into the work too hard, light pressure on the saw blade will achieve the optimum cutting speed.

APPLICATIONS

Special Cutting Techniques

1.Straight cuts – To obtain a perfectly straight cut, clamp a strip of wood as a guide along the workpiece or use the parallel guide (ac- cessory).

2.Cutting at a bevel angle – Adjust the shoe to the correct angle (See “Adjusting the Shoe”).

3.Cutting close to obstacles – Move the shoe backward to provide greater clearance.

4.Cutting Sheet Metal – Sheet metal may vibrate when being cut. To minimize this vibration, clamp the workpiece to a wood base.

Plunge Cutting (Fig. 5)

The MILWAUKEE 12 Volt Jig Saw is well suited to making plunge cuts into soft materials without a pre-drilled hole. Harder materials require a starter hole with a diameter slightly wider than the blade.

1.To make a plunge cut, move the shoe all the way back.

2.Set the orbital action selector to 0.

3.Make sure nothing below the intended cut area will be damaged.

4.Without switching the tool on, place the front edge of the shoe solidly on workpiece (a).

5.Align the blade with the intended cut line, keeping it above the workpiece.

6.Using the front edge of the shoe as a pivot, turn the tool on and gradually lower the blade into the workpiece (b).

7.When the shoe is firmly against the workpiece, begin the cut (c).

Fig. 5

a

b

c

page 5

Page 4 Page 6
Page 5
Image 5
StreamLight 6267-20 manual Operation, Applications
Page 4 Page 6

6267-20 specifications

The StreamLight 6267-20 is a robust and versatile tactical flashlight designed primarily for law enforcement, military personnel, and outdoor enthusiasts. With its combination of advanced technology, practical features, and durable construction, it stands out as a reliable tool for any situation where high-performance illumination is required.

One of the main features of the StreamLight 6267-20 is its impressive lumen output. With a maximum brightness of 800 lumens, this flashlight provides a powerful beam that can reach distances of up to 600 feet, making it ideal for long-range visibility in dark environments. The light also has multiple brightness settings, allowing users to adjust the output according to their specific needs. In addition to the high setting, it includes a medium and low setting, as well as a strobe function for signaling or disorienting potential threats.

The StreamLight 6267-20 utilizes C4 LED technology, known for its exceptional efficiency and longevity. This LED technology ensures that the flashlight operates for extended periods without sacrificing brightness. The lens is made from toughened glass, providing excellent protection against impacts and scratches while ensuring a clear and focused beam.

Durability is one of the defining characteristics of the StreamLight 6267-20. Constructed from high-quality aluminum with an anodized finish, this flashlight is both lightweight and sturdy. It is designed to withstand harsh conditions, featuring an IPX4 rating for water resistance and a drop-resistant design that can endure falls from significant heights.

The user-friendly design of the StreamLight 6267-20 is another highlight. It features a tactical tail switch that allows for quick and easy operation, even in stressful situations. The flashlight can be easily activated with one hand, facilitating seamless transitions between different lighting modes.

Additionally, the StreamLight 6267-20 is equipped with a rechargeable battery, eliminating the need for frequent battery replacements and ensuring that users are always prepared. The included charging cradle offers a convenient solution for maintaining battery life.

In conclusion, the StreamLight 6267-20 is an outstanding flashlight that excels in performance, durability, and versatility. Its powerful illumination, sturdy construction, and user-friendly features make it an excellent choice for professionals and outdoor enthusiasts alike, ensuring reliability in moments that count.
Top Page Image Contents