Electrical - General Instructions
It is recommended that a licensed electrician install the power to your spa, in accordance with the National Electric Code or any local electrical codes in effect at the time of installation.
The circuit breaker must be dedicated and cannot be shared with any other appliances. It should be labeled and easily accessible to users. DO NOT USE EXTENSION OR PLUG- TYPE CORDS OF ANY KIND. The use of a
Metal surfaces within 5 feet of the spa must be grounded to the spa.
A 120 Volt - 20 Amp GFI rated plug is furnished with the Rio Spa.
CAUTION: This spa will not work if more than one GFCI is used on the circuit.
110/220 Volt Rio
Electrical Connections:
TERMINAL
BLOCK
Two Wire Live (black) Hot Black
& Ground |
|
|
| |
Neutral (white) Neutral | ||||
| ||||
|
|
|
| |
|
| Hot Red | ||
Ground (copper or green)GRD
Connections should be made using copper conductors only. The connecting wire and circuit breakers or fuses must be sized to accommodate the total ampere load as specified on the equipment module data label.
Strong Pools and Spas only makes electrical recommendations, always consult a certified electrician.
4
