Sub-Zero 700BR dimensions A M E D C a B I N E T R Y a P P L I C a T I O N S

Planning Information

Integrated Model 700BR

F R A M E D C A B I N E T R Y
		SUB-ZERO	24
			(610)
CABINET		UNIT	TO WALL
FRAME
CABINET	1/8" (3)	PANEL
DOOR	REVEAL
		27
		(686)

Traditional Frame – full overlay (top view).

	SUB-ZERO		24
			(610)
CABINET	UNIT	TO WALL
FRAME
CABINET	1/8" (3)	PANEL
DOOR	REVEAL
		27
		(686)

Traditional Frame – standard overlay (top view).

	SUB-ZERO	24
		(610)
CABINET	UNIT	TO WALL
FRAME
CABINET	PANEL
DOOR	1/8" (3)
	REVEAL
	27
	(686)
Traditional Frame – 3/8" (10) offset
(top view).

F R A M E D C A B I N E T R Y A P P L I C A T I O N S

Framed cabinetry applications present you with different questions to address. The illustrations on this page show common applications of framed cabinetry. These are not meant to be the only alternatives, but are suggestions from designers around the country.

IMPORTANT NOTE: The depth of each Integrated unit is 24" (610) from the front of the unit to its back. You must allow for the thickness of the panel you are applying when planning for the finished rough opening depth if you want the front panel to be flush with surrounding cabinetry. You may have to move the unit back into drywall or bring the cabinets forward to achieve a flush fit. Refer to the illustrations.

Illustrations on the following pages give dimensions for an Integrated drawer unit installed within a framed cabinetry beaded inset application. Review the illustrations, giving particular attention to the overall panel specifications.

Dimensions in parentheses are in
millimeters unless otherwise specified.	7