Sub-Zero CT36G, CT30G, CT15G manual Burner Pan, G N At U R E P O L I S H

W O L F GAS COOKTOP U S E & C A R E

CARE R E C O M M E N D AT I O N S

C O M P O N E N T	C A R E R E C O M M E N D AT I O N
Exterior Surface	CAUTION: Make sure the gas cooktop is off and all surfaces are cool before
Stainless steel	cleaning any part of the cooktop.
Burner Pan	Although stainless steel is resistant to most stains, it is not totally
Stainless steel	impervious to damage. Salt and some cooking liquids may pit and stain the
	surface. Always remove these spills immediately.
	General care: Use a clean cloth or sponge; wipe with warm water and a mild
	dish detergent. Rinse and dry immediately.
	Exterior finish: To clean the exterior of a classic or platinum stainless steel
	model, use a soft, nonabrasive stainless steel cleaner like Signature Polish
	(see side note) and apply with a soft, lint-free cloth.
	Spray degreasers: Spray on a cloth and wipe surface to remove fingerprints
	and greasy spatters. Buff dry immediately to avoid streaking.
	Hard water stains: Use white vinegar and water.
	Do not use abrasive cleaners (e.g. Comet); they will permanently scratch the
	surface. Do not use steel wool pads.
Burner Cap	Cool first. Wash in warm water and liquid detergent or mild abrasive cleaner.
Porcelain enamel	Foods high in acid or sugar content, such as milk, tomatoes, sauerkraut, fruit
	juices or pie filling, may pit or craze the surface. Remove as soon as possible
	before heating again.
	Never wipe a warm or hot porcelain surface with a damp sponge; it may
	cause chipping or crazing (tiny hairlike cracks).
Burner Grates	Remove from cooktop and place on a flat surface near the sink to clean.
Porcelain-coated	Nonabrasive cleaners: Hot water and liquid detergent or a paste of baking
cast iron
	soda and water; use a plastic pad or sponge.
	Mild abrasive and abrasive cleaners: Use sparingly.
Control Knobs	To remove, slip the edge of a dish towel under the knob; pull edges together.
Chrome-plated	Using the towel for leverage, lift up, pulling the knob off the valve stem.
	General care: Wipe each knob with damp cloth and mild soap and water;
	rinse and dry. Never soak or use abrasive cleaners; they will scratch the
	finish and remove the markings.
Control Panel	Spray cleaners: Removes fingerprints and greasy food soils. Spray first on
Tempered glass	a cloth before wiping panel.
Spark Igniters	Keep dry; never spray water or cleaner directly on the igniter. When cleaning
Ceramic	around the surface burner, be careful that the cloth does not catch on the
	igniter and damage it.

Dimensions in parentheses are in millimeters unless otherwise specified.

S I G N AT U R E P O L I S H

Signature Polish is available from Signature Limited Laboratory,

P. O. Box 13436, Dayton, Ohio 45413-0436, or call 877-376-5474 (toll free).

15