Before Putting Into Use
These instructions are intended for the user. They describe the appliance and the correct and safe way to use it. The instruction manual was prepared for various types/models of refrigerators. Therefore you may find in it descriptions of some accessories and functions that your appliance may not have.
Before connecting the appliance to the power supply, leave it standing for about 2 hours, which will reduce a possibility of malfunctions in the cooling system due to transport handling.
Clean the appliance thoroughly; especially in the interior (See Cleaning the Appliance).
In case the interior accessories are not correctly placed, rearrange them as necessary.
Mounting Instructions
Integrated appliances are equipped with instructions for mounting the appliance into the kitchen unit.
The appliance should be mounted by qualified technicians and instructions are for their use only.
We Care for the Environment
Our appliances are distributed in packaging made of environmental friendly material which could safely be recycled, disposed of or destroyed without any effects on the environment whatsoever.
Our instruction manuals are printed either on recycled paper or chlorine free bleached paper.
Tips for Energy Savings
Try not to open the door too often, especially when the weather is hot and humid. Once you open the door try to close it as soon as possible.
Every now and then check if the appliance is sufficiently ventilated (adequate air circulation behind the appliance).
Set thermostat from higher to lower settings as soon as possible (depending on how loaded the appliance is, ambient temperature etc...). The coils on the rear of the refrigerator should be cleaned and free of dust or any impurities.
Ice and frost layer increase energy consumption, so do clean the appliance as soon as the layer is 1/8” thick.
Always consider instructions stated in sections Positioning and Energy Saving Tips, otherwise the energy consumption is substantially higher.
Instructions for Use
