4358-3412E Summit 3/2/07 2:55 PM Page 41
Reinstall Harness
3 | 6 |
Thread one end of harness down through slot on left side of shell (1),
1 |
Reinstall Harness:
Fit the buckle strap down through the slot in the seat. Make sure buckle faces out.
5 |
4 |
1 |
3 |
2 |
across bottom of seat (2) and up through slot on right side (3).
Thread one buckle plate onto harness from back to front (4).Thread the harness retainer (5). Do the same to the other harness end. Make sure the harness is not twisted.
Push harness ends through upper slots in shell (6).
2 |
With seat reclined all the way back, reach under seat between base and shell and pull buckle clip through pad and shell. Make sure buckle clip is flush against bottom of shell.
4 |
Pull harness through the back. Make sure the harness goes OVER the metal bar, BETWEEN metal bar and plastic handle of the harness/headrest adjuster.
Fit loops on harness ends onto the splitter plate.
!WARNING:
Failure to place buckle’s metal plate completely through pad and shell can result in serious injury or death to the child.
!WARNING
Failure to reattach the buckle and harness correctly, can result in serious injury or death.
38 | 39 |
