English
Door Alignment
Freezer Door: (see fig. # 1)
1.Remove hinge cover screw.
2.Remove the top hinge cover.
3.Loosen the top hinge screws using a Phillips head screwdriver.
4.Adjust the door or put a spacer in between and then tighten the screws.
5.Replace the top hinge cover.
Hinge cover
fig. # 1
Top hinge
Reversing the Door Swing
Left/right door opening method:
This product allows you to reverse the door opening from left to right and back. You can select your preference of door opening by following the procedure to make the change.
Dismantling: (see fig. # 1 and fig. # 2)
1.Affix refrigerator and freezer door by sticking adhesive tape on both sides to hold doors in place.
2.As shown in fig. 1, dismantle the hinge cover on the upper part of freezer door with a Phillips head screwdriver. Then remove the three screws that hold the hinge. Take out the hinge by pulling it vertically, and keep it in a safe place.
3.Remove the adhesive tape on freezer door, lift it and take off the door, and carefully put it aside.
4.Dismantle two screws of the central hinge, lift it and take off the central hinge, and keep them in a safe place. (see fig # 2)
5.Remove the adhesive tape on refrigerator door, lift it and take refrigerator door, and carefully put it aside.
6.Remove the doorstoppers from the refrigerator and freezer doors.
7.Insert left side doorstopper (provided in your packing) on the left side bottom hole of the refrigerator door and on the left side bottom hole of
7the freezer door. Fasten with screws provided.
