Before Putting Into Use
Instructions for Use
These instructions for use are intended for the user. They describe the appliance and the correct and safe way to use it. The instructions were prepared for various models/types of refrigerators therefore you may find in it descriptions of some accessories and functions that do not apply to your appliance.
•Remove the interior and exterior packaging
•Before connecting the appliance to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
•Clean the interior surface with lukewarm water using a soft cloth.
We Care About the Environment
•Our appliances are distributed in packaging made of environmental friendly materials which could safely be recycled, disposed of or destroyed without any effects on the environment whatsoever.
•Our instruction manuals are printed on recycled paper or chlorine free bleached paper.
Tips for Energy Savings
•Try not to open the door too often, especially when the weather is hot and humid. Once you open the door try to close it as soon as possible.
•Every now and then check if the appliance is sufficiently ventilated (adequate air circulation behind the appliance).
•Set thermostat from higher to lower settings as soon as possible (depending on how loaded the appliance is, the ambient temperature etc...).
•The coils on the rear of the refrigerator should be cleaned and free of dust or any other impurities.
•Ice and frost layer increase energy consumption, so do clean the appliance as soon as the layer is 1/8” thick.
•Always consider instructions stated in sections Positioning and Energy Saving Tips, otherwise the energy consumption is substantially higher.
•Do not place hot foods in the refrigerator.
•A cool dry place allows your refrigerator to operate more efficiently so keep the refrigerator away from stoves and other heat sources.
Instructions for Use
