Sun Microsystems Computer Monitor manual Front

User’s Manual - 2

Introduction

Front

1.	Auto button	Use this button for auto adjustment direct access.
2.	Exit / Source button	Use this button to Exit the active menu or the OSD.
		Push the 'Source' button to select the video signal input while the OSD is off.
		(When the Source button is pressed to change the input mode, a message
		appears in the center of the screen displaying the current mode -- analog or
		digital input signal.)
		Note: If you select the Digital mode, you must connect your monitor to the
		graphic card’s digital port using the DVI cable.
3.	Adjust buttons	These buttons allow you to highlight and adjust items in the menu.
4.	Menu button	Use this button to open the OSD and activate a highlighted menu item.
5.	Power button	Use this button to turn the monitor on and off.
6.	Power indicator	This light glows green during normal operation, and blinks green once as the
		monitor saves your adjustments.
a. Brightness Preset button		Brightness Preset is a new feature providing an optimum viewing environment
		depending on the contents of the image you are watching. Currently three

different modes are available: Text, Internet, and Entertain. Each mode has its own pre-configured brightness value. You can easily select one of three settings by simply pressing Brightness Preset control button.

Note: See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.

Copyright(c) 2004, Sun Microsystems, Inc. All rights reserved.