User’s Manual - 19

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Troubleshooting

 

 

 

 

 

 

 

 

 

 

 

 

 

Check List

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Symptom

 

Check List

 

 

Solutions

 

 

 

I cannot see the On

Have you locked the On

Unlock the OSD by pressing the MENU

 

 

 

Screen Display.

Screen

Display

(OSD)

button for at least 5 seconds.

 

 

 

 

Menu to prevent changes?

 

 

 

 

 

 

 

 

 

The screen shows

Is the screen displaying only

Check the signal cable connection.

 

 

 

strange colors or just

one color as if looking at the

 

 

 

 

black and white.

screen through a cellophane

Make sure the video card is fully inserted in

 

 

 

 

paper?

 

 

 

 

it's slot.

 

 

 

 

 

 

 

 

 

 

Has the video card been set

Set the video card by referring to the video

 

 

 

 

 

properly?

 

 

 

card manual.

 

 

 

 

 

 

 

The screen suddenly has

Have you changed the video

Adjust screen image position and size using

 

 

 

become unbalanced.

card or the driver?

 

 

the OSD.

 

 

 

 

 

 

 

 

 

 

 

 

 

Have

you

adjusted

the

Adjust the resolution and frequency at the

 

 

 

 

 

resolution or frequency to the

video card.

 

 

 

 

monitor?

 

 

 

(Refer to the Preset Display Modes).

 

 

 

 

 

 

 

 

 

 

The screen can be unbalanced due to the cycle of the video card

 

 

 

 

signals. Readjust Position by referring to the OSD.

 

 

 

 

 

 

 

 

 

 

The screen is out of

Have

you

adjusted

the

Adjust the resolution and frequency of the

 

 

 

focus or OSD cannot be

resolution or

frequency

on

video card.

 

 

adjusted.

the monitor?

 

 

 

(Refer to the Preset Display Modes).

 

 

 

 

 

 

 

 

 

LED is blinking but no

Is the

frequency

properly

Adjust the frequency properly by referring

 

 

 

images on the screen.

adjusted when checking the

to the video card manual and the Preset

 

 

 

 

Display Timing on the menu?

Display Modes.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Check the following items if there is trouble with the monitor.

1.Check if the power cord and the video cable(s) are properly connected to the computer.

2.Check if the scanning ratio of the video screen is set at 75Hz. (Do not exceed 76Hz when using the maximum resolution.)

Note: If problems repeatedly occur, contact an authorized service center.

Copyright(c) 2004, Sun Microsystems, Inc. All rights reserved.

Page 29
Image 29
Sun Microsystems Computer Monitor Cannot see the On, Screen Display, Screen shows, Strange colors or just, Black and white