Sun Microsystems Computer Monitor manual Menu Display Time, Source Select

User’s Manual - 15

On-Screen Display

Menu Display Time

OSD How to adjust

Menu Display Time

5 10 20 50 200

(Seconds)

Menu Display Time

5 10 20 50 200

(Seconds)

Menu Display Time

The menu will automatically turn off if no adjustments are made for a certain time period.

You can set the amount of time the menu will wait before it turns off.

1.Push the Menu button.

2.Push the [-] button or [+] button until the Menu Display Time screen is displayed.

3.Push the Menu button to open the Menu Display Time selection screen.

4.Use the[-] or [+] buttons to select 5, 10, 20, 50, 200 seconds. 20 seconds is the default value.

Source Select

Source Select

Auto Manual

64.0kHz 60Hz PP

1280 x 1024

Analog

Source Select

Select Auto Source Select for the monitor to automatically select the signal source. Select Manual Source Select to manually select the signal source using the Source button.

You can see the frequency, the polarity of the operational signals and the resolution level.

1.Push the Menu button.

2.Push the [-] button or [+] button until the Source Select screen is displayed.

3.Push the Menu button to open the Source Select selection screen.

4.Use the [-] button or [+] button to select Auto or Manual.

Copyright(c) 2004, Sun Microsystems, Inc. All rights reserved.