Chapter 3 Configuring Driver Parameters 29
10-Gigabit Ethernet Driver OperatingStatistics

These statistics are part of the statistics presented by the kstat command.

TABLE3-5 describes the read-only Media Independent Interface (MII) capabilities.

These parameters define the capabilities of the hardware. The Gigabit Media

Independent Interface (GMII) supports all of the following capabilities.

TABLE3-5 Read-Only ixge Device Capabilities
Parameter Description(Local interface Capabilities)
cap_autoneg 0 = Not capable of autonegotiation
1 = Autonegotiation capable
cap_10gfdx Local interface full-duplex capability
0 = Not 10000 Mbit/sec full-duplex capable
1 = 10000 Mbit/sec full-duplex capable
cap_10ghdx Local interface half-duplex capability
0 = Not 10000 Mbit/sec half-duplex capable
1 = 10000 Mbit/sec half-duplex capable
cap_1000fdx Local interface full-duplex capability
0 = Not 1000 Mbit/sec full-duplex capable
1 = 1000 Mbit/sec full-duplex capable
cap_1000hdx Local interface half-duplex capability
0 = Not 1000 Mbit/sec half-duplex capable
1 = 1000 Mbit/sec half-duplex capable
cap_100fdx Local interface full-duplex capability
0 = Not 100 Mbit/sec full-duplex capable
1 = 100 Mbit/sec full-duplex capable
cap_100hdx Local interface half-duplex capability
0 = Not 100 Mbit/sec half-duplex capable
1 = 100 Mbit/sec half-duplex capable
cap_10fdx Local interface full-duplex capability
0 = Not 10 Mbit/sec full-duplex capable
1 = 10 Mbit/sec full-duplex capable