Sun Microsystems Interface Adapter At the ok prompt, type the boot command with the -roption

2.Log in as superuser or change to superuser.

You must possess superuser privileges to invoke the following commands. This ensures that all preinstallation scripts in the software package will be executed with superuser privileges.

#/usr/bin/su

Password: superuser-password

3. Using the pkgadd command, install the software packages as follows:.

#pkgadd -d / download-directory/sunhsip_3_1/Product

The following packages are available:

1	SUNWhsip	SunHSI/P Driver for PCI 3.1,REV=2005.xx.xx
2	SUNWhsipm	SunHSI/P	Man pages	for PCI 3.1,REV=2005.xx.xx
3	SUNWhsipu	SunHSI/P	Utilities	for PCI 3.1,REV=2005.xx.xx

Select package(s) you wish to process (or ’all’ to process all packages). (default: all) [?,??,q]: all

where download-directoryis the name of the directory where the SunHSI software was downloaded.

a.Type all or leave blank then press the Return key to continue the installation of the driver software.

If the pkgadd utility warns you that some scripts must be executed with superuser permissions, type y.

4.After successful completion of the package installation, reboot the system using the reconfigure option.

a.Synchronize the hard disks and halt the system, using the following commands.

#/usr/sbin/sync

#/usr/sbin/halt

b.At the ok prompt, type the boot command with the -roption:

ok boot -r

Chapter 3 SunHSI PCI Software Installation 13