.

.

.

lq Your Trnn

Cleaning the Soleplate

I

Clean the soleplate if starch or other residue

accum11latc.

To clean the Soleplate:

1 . Allow the iron to cool and then wipe it with a soft, damp cloth.

WARNING: DO Not use abrasive cleansers, scouring pads or vinegar to clean the soleplate, this will damage the finish.

2. Run the iron over an all-cotton cloth to remove any residue.

Using the Self-Cleaning Feature

You should use the self-cleaning feature to maintain the optimal performance of your iron. The self-cleaning feature will clean the water reservoir and steam vents of accumulated minerals, dust and lint.

In general, clean the iron:

. if the steam vents clog up, or

. once a month if you have hard water, o r

. once every two months if you have soft water

To use the self-cleaning feature:

1 . Make sure that the Steam Control and the Fabric Select dial are set to OFF.

12

Page 14
Image 14
Sunbeam 3020, 3010, 3030 manual Cleaning the Soleplate, Lq Your Trnn