Filling the Water Reservoir
You must fill the water reservoir with water to use the SPRAY MIST8 and SHOT OF STEAM features and to get steam out of your iron
Tip: Sunbeam tests each iron at the factory to ensure that they function correctly. The test may leave a small, harmless amount of water within the water reservoir.
Before you fill the water reservoir, please consider the following:
•While this iron was designed for use with tap water, very hard water will reduce the performance of the iron. If your water is very hard, Sunbeam recommends that you use tap water the first time, then consider using demineralized or distilled water for subsequent use. You should use tap water once a month, however, to maintain the iron’s optimal steam performance.
. | Do not use water that has passed through a home |
| water softening system. This type of water contains |
| minerals that will decrease the performance and |
| shorten the life of your uon. Use demineralized or |
| distilled water, instead. |
Important: When not ironing always set the Steam Control and the Fabric Select dial to OFF.
To fill the water reservoir:
1.Make sure the Iron is unplugged and that both the Fabric Select dial and the Steam Control are set to OFF.
