Dry Ironing
1 . Make sure that the Steam Control is set to OFF.
2.Plug the cord into a
3.Turn the Fabric Select dial to the Dry ironing fabric setting you desire (Silk or Synthetics) and allow the iron to heat for 2 minutes. While the Iron is heating, make sure it is sitting on its heel rest on a stable, protected surface.
Tip: Refer to the Ironing Guide on Page 16 for the recommended setting for your fabric.
Steam Ironing
1 . Follow the instructions for “Filling the Water Reservoir” on Page 5.
2.Plug the cord into a 120.Volt AC outlet. The Power Indicator will light.
3.Turn the Fabric Select dial to the Steam ironing
fabric setting you desire (Linen, Cotton or Wool) and allow the iron to heat for 2 minutes.
While the iron is heating, make sure It is sitting on its heel rest on a stable, protected surface.
Tip: | Refer to the Ironing Guide | on Page 16 | |
for | the recommended | setting for | your fabric. |
4.After the iron has heated (2 minutes), turn the Steam Control to ON.
7
