Using your Sunbeam Knife
1.Interlock blades together before inserting into the appliance. To assemble blades, grasp shaft ends below the safety guards and slip the rivet on the tip of the other blade. See Figure 1. Bring blades together ensuring tips remain together.
Note: Always use both blades when operating the Carveasy™ and the Carveasy™ Pro.
Figure 1 |
2.Hold assembled blades by the safety guards and slide shafts gently into the blade slot until clipped into position.
See Figure 2.
Warning: Only when blades are fitted should the cord be connected to the
power outlet.
Figure 2
3.Insert the plug into a
under the handle to activate the motor. Releasing the switch will automatically stop the motor.
Warning: Avoid contact with moving parts. Keep hands, hair, clothing and other utensils away from moving blades during operation to prevent personal injury and/or damage to the knife.
4.When slicing is completed, turn the power off at the power outlet and remove the plug. Slide back the Blade Release, hold the blades by the safety guards with the cutting edge facing downward and pull the blades out of the slots. See Figure 3.
Figure 3
Warning: The blades of your Sunbeam Carveasy™ and Carveasy™ Pro are sharp! Handle with extreme care. We recommend using the guard sleeve provided when handling the blades. Do not fit or remove blades whilst the knife is connected to the power outlet. Do not allow children to operate the appliance.
4
