Descaling (continued)
19.To finish, press the 
button and allow the remaining water in the reservoir to run through the brewing head.
20.Remove and empty the containers placed under the brewing head and steam wand/arm. Once emptied, once again place one under the brewing head and the other under the steam nozzle.
21.Remove the water reservoir from the machine and rinse thoroughly under running water, ensuring that all traces of the descaling solution is removed. Fill the water reservoir with clean water and place onto the machine.
22.Run two (2) full water reservoirs through the brewing head. Refill the water reservoir and run the steam wand/arm for
Note: Ensure that you continue to run water through the machine until the water runs clean and clear.
23.When this is finished, remove the water reservoir and set aside. Remove the water containers and give the machine a good wipe over.
24.Turn the machine upside down. The machine should now be on the warming plate resting on the cloth/tea towel once again.
25.Carefully replace the rubber seal, filter, washer and screw. Tighten well.
26.Turn the machine upright, so that it is now sitting correctly on the bench.
27.Replace the drip tray and froth enhancing steam attachment onto the steam nozzle.
28.Fill the water reservoir with water and position it on to the machine.
19
