Programming your espresso machine (continued)
Programming 
Double Espresso
1.Prepare the filter handle. Fit the filter handle with the two cup filter basket (38) and fill with finely ground coffee (39). Using the coffee tamp supplied, tamp the coffee grinds (40). Secure the filter handle to the group head (41) (42).
2.Place two cups under each pouring spout.
3.To commence programming press the ‘PROGRAM’ button (43). The light around the ‘PROGRAM’ button will show a constant red light and the light around the ‘MANUAL’ button will go off. Additionally the lights around the ‘POWER’, 
single
and 
double espresso buttons will remain on.
4.Press the 
double espresso button once to start the espresso pour (45). The light around the 
single espresso button will
go off and only the ‘POWER’, 
double espresso and ‘PROGRAM’ lights will remain on.
5.Allow the espresso to pour until the desired level. Once the desired level is reached stop the espresso pour by pressing the 
double espresso button. 2 beeps will signify
that the new setting for the 
double espresso operation has been programmed and stored into the machines memory.
6.The espresso machine will then return to normal operation mode and is ready to make another espresso at the push of a button.
Resetting the Factory Settings
To revert back to the original factory settings;
1.Press the ‘PROGRAM’ button once
2.Press and hold down the ‘MANUAL’ button, directly follow this by pressing and holding down the ‘PROGRAM’ button so you are holding both buttons down simultaneously.
3.Continue holding down the ‘MANUAL’ and ‘PROGRAM’ buttons for approximately 5 seconds or until you hear 4 beeps. When you hear the 4 beeps, the light around the ‘PROGRAM’ button will flash. The espresso machine has now returned to the original factory settings and the next time the single or double espresso functions are used the espresso pours will be 35 and 70mls.
21
