Descaling (continued)
Note: Depending on the size of the container under the group head on occasion this may need to be emptied throughout this process.
9.After half the solution has cycled through press the ‘MANUAL’ button to stop the flow and then press the ‘POWER’ button to turn the machine off.
10.Leave the machine off for
11.Press the ‘POWER’ button once to turn the espresso machine on.
12.Press the ‘MANUAL’ button and allow the remaining solution to cycle through the group head.
13.Remove the water reservoir from the machine and rinse thoroughly under running water, ensuring that all traces of the descaling solution is removed. Fill with clean water and replace the reservoir.
14.Press the ‘MANUAL’ button and allow the entire water reservoir to cycle through the group head.
Note: As a safety mechanism the espresso machine is programmed to automatically stop the water flow after 240mls, therefore you will need to press the ‘MANUAL’ button again to restart the water flow.
Note: Depending on the size of the container under the group head on occasion this may need to be emptied throughout this process.
15.When this is finished remove the container under the group head and give the machine a good wipe over.
16.Carefully replace the rubber seal, brewing filter/shower screen and washer to the group head. Tighten well.
17.Fill the water reservoir with fresh water and position it on to the machine.
27
