Using your Beatermix® Pro
Before using your Beatermix Pro
Before fitting the beaters or dough hooks, be sure the power cord is unplugged from the power outlet and the speed control switch is in the ‘0’ OFF position.
1. Select the desired attachments, depending on the mixing task to be performed: beaters for mixing and beating, or dough hooks for kneading.
Inserting the beaters
2a. Beaters can be inserted into either socket, as the beaters are identical.
Inserting the dough hooks
2b. To insert the dough hooks, place the dough hook with the red ring into the left socket. Place the other dough hook into the right socket.
Note: Ensure both beaters and dough hooks are fully inserted into the correct sockets or your mixing results may be affected.
Using your Beatermix Pro
1.With the speed control switch in the ‘O’ OFF position, plug the power cord into a
2.Place the beaters or dough hooks into the ingredients to be mixed and using the speed control switch select the desired mixing speed.
Select the Low range setting for kneading dough and thicker mixtures, folding, or when using the dough hooks. Select the High range setting for mixing, beating, and whipping.
Clearly marked instructions for correct mixing speeds for each type of mixture are shown in the mixing guide on page 5.
Tip: Always start mixing at slow speeds and increase the speed gradually to prevent ingredients splashing out of the mixing bowl.
When adding dry ingredients use the lowest speed to prevent the ‘snow storm’ effect.
3.Once you have finished mixing, turn the speed switch to the ‘0’ OFF position and unplug the cord from the from the power outlet. Remove the beaters/dough hooks from the mixture and press the eject button firmly to release.
4.To remove the beaters/dough hooks, place fingers loosely around the spindles and press the eject button located at the front of the head of the Beatermix Pro.
Note: Never eject the beaters or dough hooks when the Beatermix Pro is in operation.
4
