Sunbeam SCA062RWB1 user manual Operating Instructions, Airconditioner, Control Panel

Operating Instructions

Control Panel

You can easily operate this air conditioner by pressing relevant button on the control panel as well as the remote control.

Button

The air conditioner will be started when it is energized or will be stopped when it is in operation, if you press this button. When the air conditioner is heating, allow 3 minutes after you press this button.

Mode button

Each time Mode button is pressed, the operation mode is changed in sequence:

5K 6K 8K cooling only COOLINGFAN ONLY

ENERGY SAVING COOLING

8K with heater COOLINGFAN ONLYHEATING

Control Panel

ENERGY SAVINGCOOLING

NOTE: After setting the mode, allow 3 minutes before switching

Timer

Fan

Speed

to another mode.

In the FAN ONLY Mode , Room Temperature display range is

from 0 (32 ) to 38 (99	).
Room Temperature below 32		,the Temperature display L0.
Room Temperature above	99	,the Temperature display H1.

Mode

Airconditioner

Fan Speed button

Used to select fan speed in sequence auto, low, medium and high (low and medium are in same fan speed).

Timer button

Used to set or cancel timer operation.

When the unit is in operation, you can set OFF TIMER. When the unit is off, you can set ON TIMER.

Timer setting range is 0 to 24 hours.

If the OFF TIMER is set, the timer LED displays the remaining time to turn off the unit for only 12 seconds,

then LED shifts to display set temperature. If you press

TIMER button within the 12 seconds, OFF TIMER will be canceled.

If the ON TIMER is set, the timer LED displays the remaining time to turn on the unit. If you want to cancel ON TIMER, press TIMER button.

Button

Indication symbols of LED on control panel :

Auto fan speed	Cooling	F
Low fan speed	Fan only	h
		Display set temp
Medium fan speed	Heating	Display set timer
High fan speed	Energy-saving

Timer

Above LED lights on when the relevant mode is in used.

Used to set room temperature in COOLING mode or used to set time in TIMER mode.

If the two keys are pressed at the same time, the temperature LED display will alternate between and .

NOTE: Temperature setting range is from 19 (66 ) to 31 (88 ).

10