Sunbeam WW4300 Care and Cleaning, DuPont Teflon Platinum Non-stickCoating, Heat Control Probe

Care and Cleaning

DuPont Teflon Platinum Non-stick Coating

Your wok features a special scratch and abrasive-resistant non-stick coating that makes it safe to use metal utensils when cooking.

Sunbeam however recommends that care is taken with the non-stick coating particularly when using metal utensils.

Do not use sharp objects or cut food inside the wok vessel. Sunbeam will not be liable for damage to the non-stick coating where metal utensils have been misused.

When cleaning the non-stick coating do not use metal (or other abrasive) scourers. After cleaning, dry the wok and lid thoroughly with a soft cloth before storing.

Always turn the power OFF and REMOVE the plug from the power point before cleaning. Remove the Control Probe from the socket of the Wok.

Heat Control Probe.

If cleaning is necessary, wipe over probe with a damp cloth.

Do not immerse the Control Probe in water or any other liquid.

Storage.

Store the probe carefully in a safe place. Do not knock or drop it as this can damage the probe.

If damage is suspected, return the Control Probe to your nearest Sunbeam Service Centre for inspection. Refer to the back of your instruction book for Service Centre listings.

Wok, Base and Glass Lid.

The Wok, base and lid are fully immersible and can be washed in warm soapy water using a mild household detergent and a soft washing sponge.

They can also be cleaned in the dishwasher.

We recommend to wipe the Wok vessel out after each use with a paper towel to maintain the seasoning of the non-stick coating. This will also improve the non-stick performance of your Wok.

Removing Stubborn Stains.

Should your Wok require additional cleaning of stubborn stains and build up, the following method is recommended:

Combine: 2 tablespoons bicarbonate of soda and 2 teaspoons water.

1.Pre-heat the Wok for approximately 1-11/2minutes on setting 3.

2.Turn the power OFF and remove the plug from the power point. Brush the above paste solution onto the non-stick surface, allow to stand for 1 hour.

3.Wash the Wok in warm soapy water using a mild household cleaner and a soft washing sponge.

Dry with a soft cloth before storing. Before using your Wok again, re-season the non-stick surface.

To Clean Steaming Rack.

Wash in warm soapy water using a mild household detergent. Rinse thoroughly and dry with a soft cloth before storing.

9