Sunbeam WW4300 manual Using your Wok, Before the First Use

Using your Wok

Before the First Use.

Ensure any stickers are removed from the product. Wash in warm soapy water, rinse thoroughly and dry your Wok and lid.

Do not immerse the Heat Control Probe in water or any other liquid.

Season the cooking surface by applying a thin coat of cooking oil and wiping over with paper towelling. Re-seasoning is recommended every few months.

1.Insert the Heat Control Probe into the socket of the Wok.

2.Plug the cord into a 230-240V power outlet and turn the power on.

3.Set the Heat Control Probe dial to the desired temperature setting, or the recommended temperature setting for your required recipe.

Allow 5 minutes for your wok to reach the temperature setting you have selected. The Wok is now ready to use.

Note: The thermostat light on the Heat Control Probe indicates the temperature at which the dial is set.

This light will remain on until the set temperature has been reached and then will cycle on and off throughout cooking. This will ensure that the Wok maintains the correct temperature.

6