SECTION 4 | INSTALLATION INSTRUCTIONS |
|
|
4.3 INSTALLING THE DUCTS IN THE WALL
CAUTION
MANUFACTURER’S RECOMMENDATION.
BEFORE UNDERTAKING ANY INSTALLATION OF DUCTS INTO WALL, WE RECOMMEND THAT YOU CONSULT A KNOWLEDGABLE PROFESSIONAL.
A)You do not need to use window kit adapter. Mount one end of the exhaust duct into a hole of 5.6”/14.22cm in diameter in the wall; attach the other end to the back of the unit (same as above).
B)Use the exhaust outlet wall covers to cover the holes in the wall when the unit is not in use.
NOTE:
Mounting the exhaust pipe
•The supplied exhaust hose can extend from 5.75” to 63” / 40cm to 160cm for mounting. It is recommended that you use the shortest possible length of hose.
•Take care to prevent any kind of bend in the middle of the exhaust hose, as this will trap hot exhaust air, which will radiate back into the room and affect the cooling function of the unit (Fig. 10).
WARNING
Figure 10
The length of the exhaust pipe is specially designed according to the specification of this product. Do not replace or extend it with your own hose as this could cause the unit to malfunction (Fig. 11).
Figure 11
C) After installing the ducts, plug in the unit and turn the unit on.
11
