SECTION 1 IMPORTANT SAFETY INSTRUCTIONS

1.4 SPECIAL RECOMMENDATIONS

•Place the portable air conditioner in a level spot. Leave at least 20" (50.8 cm) between the unit and the wall.

•The plug should always be accessible after the unit is settled.

•In order to let the compressor work properly, always keep the portable air conditioner in a vertical position.

•Do not place the portable air conditioner near gas or any flammable liquids.

•Keep the unit far away from TVs or radios in order to avoid electromagnetic interference.

•Do not use any chemical sprays such as insecticides, painting or any flammable products near the unit. These chemical substances may interact with the plastic cabinet and warp it and cause

electric interference.

1.5ELECTRICAL REQUIREMENTS

WARNING

Electrical Shock Hazard

Plug into a grounded (3-prong) outlet.

Do not remove ground prong. Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

In the U.S. only: If codes permit and a separate ground wire is used, it is mandatory that the ground path is adequate.

Check with a qualified electrician if you are not sure if the portable air conditioner is grounded.

A three-wire, single-phase, 60Hz AC only, electrical supply is required on a separate circuit. See model and serial label for circuit amperage required for your specific model.

If the portable air conditioner has a serial plate rating 115 Volts and up to and including 7.5 Amps, the unit may conflict with a fuse or circuit breaker with other devices.

HOWEVER, THE MAXIMUM AMPS OF ALL DEVICES ON THAT FUSE OR CIRCUIT BREAKER CAN NOT EXCEED THE AMPS OF THE FUSE OR CIRCUIT BREAKER.

If the portable air conditioner has a serial plate rating of 115 Volts and greater than 7.5 Amps it must have its own fuse or circuit breaker, and no other device or unit should be operated on that fuse or circuit breaker.

NOTE: The label lists the BTU capacity, amperage, voltage and refrigerant charge requirements.

4

Page 4 Page 6
Page 5
Image 5
Sunbeam KY-25 user manual Special Recommendations, Electrical Requirements, Electrical Shock Hazard
Page 4 Page 6

KY-25, Y specifications

The Sunbeam Y, KY-25 is a remarkable innovation in the realm of aerosol dispensers, specifically designed for efficiency and user convenience in various applications such as household cleaning, personal care, and industrial use. Combining cutting-edge technology with robust features, the KY-25 represents a significant advancement over traditional aerosol spray technologies.

One of the standout features of the Sunbeam Y, KY-25 is its ergonomic design. The dispenser is crafted to fit comfortably in the user's hand, reducing fatigue during prolonged use. The nozzle is designed for precision, allowing users to apply products evenly and accurately. This results in less waste and enhanced effectiveness in delivering sprays or liquid solutions.

The KY-25 incorporates a unique pressure regulation system that ensures consistent output regardless of the angle or orientation during use. This technology prevents drips and sputtering, providing a smooth and uninterrupted spray. As a result, users can achieve optimal coverage with minimal effort, making it an ideal choice for both commercial and domestic applications.

Another significant characteristic of the Sunbeam Y, KY-25 is its versatility. The device is compatible with various formulations, accommodating a wide range of liquids, from cleaning agents to personal care products. Additionally, the KY-25 is designed for ease of refilling, supporting sustainability by reducing single-use aerosol waste. The user-friendly refill process enables quick and hassle-free transitions between different products.

The KY-25 also boasts advanced safety features. Its design incorporates a child-proof locking mechanism to prevent accidental discharges, making it safer for households with young children. Furthermore, the materials used in its construction are resistant to corrosion and degradation, ensuring longevity and reliability in various environments.

In summary, the Sunbeam Y, KY-25 is a pioneering aerosol dispenser that blends ergonomic design, consistent performance, and versatility. With its advanced pressure regulation system, compatibility with multiple formulations, and enhanced safety features, the KY-25 stands out as a leader in its category. Whether for household chores or industrial tasks, it empowers users with a practical solution for efficient aerosol application. This combination of technology and user-centric design makes the Sunbeam Y, KY-25 a must-have for anyone looking to optimize their aerosol dispensing needs.
Top Page Image Contents