Sunbeam OPERATING REMOTE CONTROL MODEL KY-25YONLY, Operating Your Portable Air Conditioner

SECTION 5 OPERATING YOUR PORTABLE AIR CONDITIONER

5.3 OPERATING REMOTE CONTROL (MODEL KY-25Y ONLY)

The functionality of the six (6) buttons on the Remote Control are identical to the functionality of the buttons on the Control Panel. Icons for certain buttons may differ slightly. The Remote Control uses the lithium batteries, Model: CR2025 (Included). Install the batteries before using the Remote Control.

You can operate the unit either on the Control Panel or with the Remote Control.

COOLING OPERATION:

1)Plug the Power Cord into the power outlet.

2)Turn on the unit by pressing the ON/OFF Button on the control panel or the remote control.

3)Press the Mode Button on the remote control or the control panel until the symbol appears on the display.

4)Set the room temperature to your desired room temperature with the temperature ranges from 64°F- 90°F/18°C-32°C. Recommended temperatures are 80°F- 84°F/27°C-29°C.

5)Select the fan speed by pressing the Fan Button on either the remote control or the control panel .

Figure 14

SOFT-DRY OPERATION:

1)Plug the Power Cord into the power outlet.

2)Turn on the unit by pressing the ON/OFF Button on the control panel or the remote control.

3)Press the Mode Button on the remote control or the control panel until the symbol appears on the display.

4)Set the room temperature to an appropriate temperature.

5)Keep the windows and the doors closed to aid the effectiveness of the unit in removing the moisture from the room.

NOTE: The unit will not perform its dehumidifying function when the room temperature is lower than 64°F/18°C. Soft-Dry Mode is a very gentle cooling operation consisting primarily of dehumidifying. It will not lower the room temperature very much. The indoor unit Fan always runs at Low speed.

14