Sunbeam Bedding HE3900, HE3100 Using the timer, Timer auto OFF function, Timer auto ON function

Using your Convection Plus Heater continued

3.Use the plus/minus arrows to select your desired setting. The LED screen will flash the set value for 5 seconds. After 5 seconds the LED screen will display the ambient room temperature.

Note: The temperature range is from 15ºC to 28ºC. If you scroll past 28ºC the display will automatically return to 15ºC.

4.The digital thermostat is now set and will automatically maintain your selected temperature level by turning the heater on and off.

Note: It is normal for the heater to cycle on and off as it maintains the selected temperature.

5.To turn the heater off, move the ON/OFF switch to the OFF position.

Using the timer

Your HE3900 Convection Plus heater features a timer function that switches the heater off after a specified period of time, eg: 3 hours. It also enables you to preheat the room by switching the heater on automatically.

Timer auto OFF function

1.Set the heater to the desired setting using the mode button.

2.Press the timer button. The LED screen will display a default time of 0.0hr.

3.Use the plus/minus arrows to select the number of hours you wish the heater to operate before it automatically switches off, between 0.5 and 8 hours.

Note: The timer will automatically set within 5 seconds of the last time that either the plus/minus arrows or timer button are pressed.

4.Once you have selected your desired timer setting, the ambient room temperature and

the timer icon will display on the LED screen.

Note: When the time has run out, the

timer icon will cease to appear on the LED screen. The heater will then return to STANDBY mode.

Timer auto ON function

The timer auto on function allows you to program the heater to switch on at a specified time to preheat the room.

1.Set the heater to the standby mode, by pressing the mode button.

Note: The LED screen will appear black in this mode.

2.Press the timer button. The LED screen will display a default time of 0.0hr.

3.Use the plus/minus arrows to select the number of hours you wish the heater to operate before it automatically switches on, between 1 and 12 hours.

Note: The timer will automatically set within 5 seconds of the last time that either the plus/minus arrows or timer buttons are pressed.

4.Once you have selected your desired timer setting, the ambient room temperature and

the timer icon will display on the LED screen.

Note: When the time has run out, the

timer icon will cease to appear on the LED screen. The heater will then return to AUTO mode, set to your last pre-set temperature.

10