Rough-In
Roughing-in the Olé-2SF requires careful attention to the design plan made previously. Review the previ- ous page and make a list of things to factor in to specific mounting loca- tions, before deciding exactly where to place the unit. In order to avoid Electro-Magnetic Interference (EMI), do not mount touchpads close to light dimmers. Leave at least one stud-bay open between touchpads and dimmers (leave more space if multiple dimmers are present). Avoid installing Olé-2SF touchpads in ar- eas that will receive direct sunlight. Sunlight can flood the IR receiver and make the system inoperative.
Do not mount touchpads outdoors! Corrosion will damage them. Sunfire does not warrant Olé touchpads for outdoor use.
Mounting Height
The Olé-2SF has no viewing angle limitations, so mounting height should be determined by the average height of the user. Typical mounting height is 56-60 inches from the floor to the bottom of the frame. This will provide optimum viewing for the largest number of people.
11
