The Local IR-RECEIVER IN is typically used to connect an external IR sensor to the touchpad. Typical applications include a plasma- friendly IR sensor placed near a TV, or an auxiliary IR sensor placed in an area more convenient than the location of the touchpad. IR signals that are received by the IR Input are sent out both the Local IR-EMITTER OUT and the System Port.
Connect IR-RECEIVER IN,
-GROUND and +12VOLTS OUT (if required) as shown below. Consult the instruction manual that came with your external equipment before making connections.
Note: In certain cases, the built-in IR sensor on the Olé-2SF can be flooded with plasma TV interference or other ambient light interference. In this case, connect a plasma- friendly IR sensor to the Local IR Input and disable the built-in IR sensor in SunTools.
