Installing the grille assembly
1. Secure the grille frame to the | 6. Carefully press the grille into the |
woofer baffle using 12 screws | frame, and make sure it is fully |
supplied in the grille package. | pressed home on all sides. |
Location of the grille frame screws
2.If you have already painted the frame and grille, please jump to step 6.
3.Fit the supplied cardboard paint shield into the frame to cover the woofers and baffle. Press the grille in place temporarily.
4.Paint the frame and grille to match the wall and decor.
5.When the paint is dry, carefully remove the grille and discard the paint shield. (It is important to remember this step!)
The grille installed into the frame
Conclusion
This completes the SubRosa
For details regarding the operation of the subwoofer and the automatic equal- ization procedure, please refer to the user's guide that comes with the Sunfire SubRosa amplifier.
© 2007 Sunfire Corporation.
All rights reserved. Sunfire Corporation reserves the right to improve its products at any time. Therefore, specifications and installation details are subject to change without notice.
Manual
Grille Install
User's Manual 
19
