Cab Install
Cabinet Installation
1.With the help of an assistant to lift the cabinet, check the fit of the cabinet into the framing. Use wood shims if there is any gap between the cabinet sides and the vertical studs.
2.If it makes it easier, you can con- nect the wiring to the cabinet before you secure it in place. See the next page for details.
3.When you are happy with the fit of the cabinet, apply wood glue, such as Liquid Nails™ along the cabinet sides. Fit the cabinet into the fram- ing until its front face is flush with the front face of the framing.
4.Use a level to check that the cabi- net is vertical.
5.Use six woodscrews (supplied) or more on each side to secure the cabinet in place. Do not screw into any of the joints of the cabinet. The cabinet walls are 3/4 inch thick, so make sure the screws do not pass all the way through. (The supplied screws will not pass through, if used with standard 2x4 studs.)
Gluing and screwing the
cabinet in place
10 User's Manual