Sunfire SRS210W-C Introduction, System components, About this installation guide, SRS-210W-C

Introduction

Introduction

Thank you for purchasing this Sunfire SubRosa™ Subwoofer. We hope you enjoy it and the music it makes as much as we have enjoyed creating it for you.

The breakthrough features of the subwoofer include:

•I-BEAM™ anti-shake mechanism to reduce wall vibration

•Dual ten-inch, High Back-emf woof- ers with neodymium magnets for low-profile

•2700W Tracking Downconverter™ companion amplifier

•Fully automatic room equalization

System components

The required components for a func- tioning SubRosa in-wall system are:

•SRS-210W-C

In-wall cabinet and hardware.

The SubRosa subwoofer is a finely tuned system and should only be used with the Sunfire SRA-2700EQ

companion amplifier. Using any other am- plifier will offer inferior performance and may void your warranty.

About this installation guide

This guide contains instructions for installing the SubRosa in-wall cabinet into various locations, and installing the front baffle assembly, and the grille assembly.

For information regarding the opera- tion of the system, please refer to the user's guide that comes with the companion SRA-2700EQ amplifier.

Tools and experience required

The cabinet should only be installed by qualified and experi- enced professional installers.

General construction tools are required for framing wood studs, gluing and screwing the cabinet in place, and apply- ing sheetrock.

•SRS-210W-B

Front baffle containing two woofers, the I-BEAM™ anti-shake device, and a crossover network.

•SRS-210W-G Grille assembly

•SRA-2700EQ

Amplifier and its room equalization measurement microphone

User's Manual