Sunpentown Intl RF-322W Electrical Requirement, Warning Do Not Remove Ground Prong, Leveling

ELECTRICAL REQUIREMENT

WARNING: DO NOT REMOVE GROUND PRONG.

DO NOT USE AN ADAPTOR.

DO NOT USE EXTENSION CORD.

Failure to follow these instructions can result in death, fire or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

This unit is applied with power supply of single-phase alternating current of 115V~, 60Hz. This appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong wall outlet. DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD (GROUND) PRONG FROM THE POWER CORD. Unit should be plugged in a dedicated outlet.

Use a receptacle which cannot be turned off with a switch or pull chain. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or replacing a light bulb, turn the refrigerator control to OFF and disconnect the refrigerator from electrical source. When finished, reconnect the refrigerator to the electrical source and reset the control to the desired setting.

LEVELING

If the refrigerator is not leveled during installation, the doors may not close or seal properly, causing cooling, frost, or moisture problems. It is very important that the refrigerator is leveled in order to function properly.

To level your refrigerator, turn the level leg clockwise to raise or turn counter-clockwise to lower.

NOTE: Having someone push and tilt the unit backwards to take some weight off the leveling leg will make adjustment easier.

3