8
S p e c i f i c a t i o n s / M a i n t e n a n c e
BATH BRACKET SPECIFICATIONS
20" mm) |
|
|
|
| 2300 mm) | |
|
|
|
| |||
|
|
|
| |||
|
|
|
| |||
(510 |
|
|
|
| 90.5" | |
|
|
|
|
| ||
|
|
|
|
| 67" – | (1700 – |
|
|
|
|
| ||
| – | 24" | |
10" | 610 | mm) | |
– |
| ||
|
|
| |
(250 |
|
| |
| ) | |
| 65" mm | |
– | ||
53" | 1650 | |
– | ||
(1350 | ||
| ||
Item Number | |
Weight Capacity | 440lbs. (200 kg) |
Length of Base Rail | 53" - 65" |
| |
Length of Post | 67" – 90.5" |
| |
Post base travel zone | 10" - 24" |
| |
Material | Anodized Aluminum/ |
| Stainless Steel |
Weight | 25.5 lbs. (11.5 kg) |
Ceiling Plate | 20" (510 mm) |
MAINTENANCE
Maintenance must be performed only by qualified personnel.
Failure to follow maintenance instructions below when indicated could result in injury or damage.
Periodic inspection should be performed by a person who is suitably and properly qualified and well acquainted with the design, use and care of the Easytrack System.
Inspection should be carried out both routinely (at least as often as specified) and as necessary. All defects and damages that have lead to corrective actions should be noted, signed and dated by the inspector. Defects and resulting actions should be reported in writing to your supplier.
Upon receipt of your Easytrack Bath Base Kit:
1.Make sure you received all components listed in Figure 1.
2.Inspect all parts for possible damage in transit.
3.Ensure all components are in working order.
4.Repair/replace any faulty parts.
5.Keep a log of any repair/replacement required.
Bath Base Kit
