M a i n t e n a n c e
Before each time you use the Easytrack Bath Base Kit:
1.Clean the outside and inside of the rail and wipe out any water in the rail. Failure to do so for a long period of time can cause corrosion that will weaken the rail.
2.Check with the level if the posts are straight. In they are not straight, remove rail and reinstall posts (see Assembly instructions).
3.Check that the rail is secure in place. Press the rail upwards to make sure that the rail is locked onto the post.
4.Check for any appearance of damage. If there is apparent damage, do not use the Easytrack System.
5.Make sure the red zone at the top of the post is not visible. If the red zone is visi- ble, tighten posts according to the assembly instructions.
Every month:
1.Use level supplied to ensure all posts are straight.
2.Clean inside of rail with a damp cloth to ensure there is no dust or grease
3.Make sure the red zone is not visible. If red zone is visible, tighten posts according to assembly instructions.
4.Check to ensure you still have all your original parts. If any parts are missing they should be replaced BEFORE USING THE EASYTRACK AGAIN.
5.Check to make sure that the trolley in the rail moves freely. Trolley may need to be cleaned or replaced.
6.Check for the appearance of rust. If rust is starting to appear, simply scrub the piece clean.
7.Examine all joints and pieces for wear and fatigue. Replace any part that looks dam- aged or worn.
8.Document inspection and any repairs.
If equipment is moved on a regular basis:
1.Make sure all components are accounted for.
2.Check “Requirements” and “Important Safeguards” before reinstalling the Easytrack System.
3.Make sure the padding on the foot and top plate is clear of any foreign substance and is not damaged. If neoprene (rubber) on either top or bottom plate appears dam- aged then the plate must be replaced.
4.Make sure the level is still working.
5.Look for signs of wear or breakage on all parts. Replace any parts that appear worn or damaged.
Follow guidelines in your portable lift manual for maintenance and procedures on the lift.
9
Bath Base Kit
