Preparing your wheelchair for use

Fitting the batteries

Your Sunrise wheelchair batteries are located in two battery boxes. With your powerbase fully assembled, drop the battery boxes into the centre of the powerbase. It is important to note that there is a left and a right hand battery box. The easiest way to remember which battery box locates where, is to ensure that the curved side panel of each battery box forms a natural wheel arch to the rear wheels.

Locate securely, the battery boxes and lid clips. Take the leads from each battery box and connect together.

Connect battery socket on Battery loom to socket on loom coming out of rear chassis moulding.

Attaching the rear view mirror

Connecting plugs

Battery box clip

Fig. 2

1.Firstly set the Pilot Plus remote pod arm into the desired position.

2.Place the metal clamp over the remote arm, between the adjust bracket and the rubber gaiter of the pilot plus swing-away. The holes must be toward the outside of the chair.

3.Place the mirror through the clamp holes and then, using the locking handle, begin to tighten the mirror in position.

4.The mirror should stand vertically once in position but can be subsequently adjusted by slackening off the locking handle, adjusting the mirror and

then re-tightening.

Fig. 3

Issue 4

8

 

 

Page 11
Image 11
Sunrise Medical F50 owner manual Fitting the batteries, Attaching the rear view mirror, Then re-tightening