Sunrise Medical Mighty Lite Seat and Back Angle Adjustment, To adjust the seat angle

20

V I

I

.

O

p

e

r

a

t

i

n

g

I

n

s t r

u

c

t

i

o

n

s

G. SEAT DEPTH ADJUSTMENT

9

1.Determine the proper seat depth.

2.To change seat depth, undo the Velcro® that attaches the back panel to the seat panel of the sling. (Fig. 9)

3.Relieve fabric tension by partially folding the chair.

4.Depress spring button on the side of the seat rail

	(Fig. 10A) and move seat tube to the desired
							10
	depth until spring button relocates. (Fig. 10B)
5.	Repeat operation on other side of seat (Fig. 10C).
6.	Reattach the seat panel to the back panel of the					C
	sling (Fig. 9) for proper adjustment.
H. SEAT AND BACK ANGLE ADJUSTMENT
					B
To adjust the seat angle:
			A
1.	Locate the seat angle adjustment bolt along the
	seat rail (Fig. 11A).						11
2.	Loosen and remove fasteners from both sides of
	the seat and relocate as required in the top or
	bottom hole (Fig. 12). See Set-up matrix for
	proper location.
3.	Secure the nuts tightly.
CAUTION– The modification of the seat angle will affect the				A
	back angle. Consult matrix to validate the adjust-
	ment of the back in conformity of the seat-to-
	back angle. Refer to the “Back Angle Adjustment”						12
	section if necessary.
To adjust the back angle:
1.	To adjust the back angle relative to the seat,
	consult the Set-up Matrix (Page 23).
2.	To relocate the back post along the seat rail,
	loosen and remove fasteners from both sides of
	the seat (Fig. 12) and align the back posts along
	the seat rail in the required location.
							13
3.	Put fasteners back in place and secure the nuts
	tightly.
4.	When the adjustment of the top of the back post
	is necessary according to the Set-up Matrix,
	remove fasteners from both sides of the frame
		A
	(Fig. 13). Align the cross-brace along the back
	post in the required location. Insert fasteners on
	both sides. Secure the nuts tightly.

100336 Rev. D