Sunrise Medical Mighty Lite instruction manual Harness, Headrest Extensions

22

V I

I

.

O

p

e

r

a

t

i

n

g

I

n

s t r

u

c

t

i

o

n

s

K. CRUTCH STRAP DEPTH ADJUSTMENT

19

1.

Determine the appropriate depth for the user.

2.

Undo the adjuster (Fig. 19A).

3.

Relocate the strap in the appropriate slot

(Fig. 19B).

B

4.

Thread the strap back in the adjuster.

A

L. “H” HARNESS

“H” Harness Adjustment

1.Place child in the chair and fasten the pelvic positioning belt.

2.Position the child's hips and buckle the pelvic positioning belt to the proper position.

3.Connect both straps of the “H” harness to the pelvic positioning belt.

4.Adjust both shoulder straps using the adjusters to get a snug fit (Fig. 20A).

If required, the height of the attachment point of the shoulder straps can be adjusted. To do so, undo the knob (Fig. 21), and take the insert out of the grommet on the upholstery. Relocate the insert in the suitable position and tighten in place with the knob.

M. HEADREST EXTENSIONS

Height Adjustment (All head supports)

Adjust the rubber stop up or down along the stem (Fig. 22A) on both sides of the headrest extension.

Width Adjustment

1.Remove the headrest cover from the structure (Fig. 22B).

2.Extend or reduce to the desired width by adjusting the independent flaps one on the other (Fig. 22C).

3.Put the cover back in place.

Taking the headrest extension on and off the chair

1.To remove headrest extension, fold the chair slightly and pull the stems out the sleeves.

2.To put the headrest extension back in place, fold the chair slightly and slide the stems into the sockets until the down to the rubber stops.

20

A

21

22

B

CA

100336 Rev. D