I X . S E T - U P , A D J U S T M E N T & U S E
I X . S E T U P , A D J U S T M E N T & U S E
H.HEIGHT-ADJUSTABLE ARMRESTS (OPTIONAL) (SEAT FRAME ONLY)
1.Installation
a.Slide the outer armpost into the receiver mounted to the wheelchair frame.
b.The armrest will automatically lock into place.
2.Height Adjustment
a.Rotate release lever to second stop.
b.Slide armrest pad up or down to desired height.
c.Return lever to locked position against armpost.
d.Push arm pad until upper armpost locks firmly into place.
3.Removing Armrest
a.Rotate release lever to first stop and remove the armrest.
4.Replacing Armrest
a.Slide armrest back into receiver.
b.Return release lever to locked posi- tion against armpost.
5.Adjusting Armrest Receiver Fit
To tighten or loosen the fit of the outer arm- post in the receiver:
a)Loosen the four bolts on the sides of the receiver.
b)With the armrest in the receiver, squeeze the receiver to achieve the desired fit.
c)Tighten the four bolts.
6.Adjusting Inner Armpost Fit
|
| 4 |
|
| 3 |
| 5 | 8 |
|
| |
|
| 10 |
2 |
| 7 |
|
| |
|
| 6 |
|
| 1 |
|
| 9 |
Height-Adjustable
Armrest Key
1.Outer armpost
2.Standard receiver
3.Release lever
4.Armrest pad
5.Transfer bar
6.Side panel
7.Outer armpost tension adjustment set screws
8.Inner armpost
9.Receiver adjustment bolts
10.Release Lever
I.ARMREST WIDTH ADJUSTMENT (CONTOUR & HIGH BACK CONTOUR SEATS) The width of the armrest mounts can be adjusted.
a)Loosen screws (A).
b)Slide armrest mounting tubes to desired location.
c)Ensure that at least 1" of tubing lies inward of the set screws.
d) Tighten screws (A).
J. ARMREST ANGLE
ADJUSTMENT (CONTOUR &
HIGH BACK CONTOUR SEATS) | A | ||
a) | Raise | ||
| |||
b) | Loosen bolt (B) and jam nut. |
| |
c) | Adjust the height of the bolt to |
| |
| desired height. |
| |
d) | Tighten jam nut. |
| |
B
a)Two set screws are installed in the outer armpost.
b)Turn the set screws in or out until the desired fit is achieved.
930486 Rev. A | 32 | 33 | 930486 Rev. A |
