Sunrise Medical Quickie S-525 Elevating Legrest Optional, Remote Joystick Installation Option

I X . S E T - U P , A D J U S T M E N T & U S E

I X . S E T U P , A D J U S T M E N T & U S E

3.Height Adjustment

a.Remove both bolts (F) in the hanger frame tube.

b.Reposition footrest height.

c.Re-tighten all bolts (F).

C. ELEVATING LEGREST (OPTIONAL)

1.Installation

To install or remove Elevating Legrest (ELR) see instructions for Swing-away Footrest installation page 29.

2.Adjustment

a)To raise legrest, lift to desired position. Legrest will automatically lock in place.

b)To lower legrest, while seated in chair, first lift slightly then press release lever (F) down and lower legrest to desired position.

D. REMOTE JOYSTICK

INSTALLATION (OPTION)

1.To Connect

a.Line up small cylindrical connector with its receptacle on the rear of the joystick.

b.Push in firmly.

2.To disconnect

Pull back on the retaining ring (H) of the cylindrical connector until it disconnects from the joystick box.

E.TO ADJUST THE HEIGHT OF THE REMOTE JOYSTICK

a)Remove the two pan-head screws (A), securing the angle bracket mount (B).

b)Remove the Joystick from the mount by unfastening the two screws (C) on the underside of the mount.

c)Position angle bracket mount such that you achieve the desired joystick height. Four positions are available by relocating the mount either on the top or bottom of the mounting bar (D) and/or by rotation of the angle bracket mount.

E

F

F

H

BA

C

D

F.JOYSTICK SWING-AWAY RETRACTABLE MOUNT (OPTIONAL)

The joystick is mounted with a mechanism which allows the control to be locked in a forward or retracted position using magnets.

Adjustment

a.To retract joystick, push outward on the inside of joystick.

b.Push joystick away from front of armrest until it locks into retracted position.

c.To return to forward position, push joystick forward until it locks into place.

G.DUAL-POST HEIGHT- ADJUSTABLE ARMRESTS

The dual-post flip-back armrest can be used as either a flip-back armrest or a removable armrest.

1.Installing Armrest

a.Insert front and rear posts into armrest receivers.

b.Engage levers (A and B) to secure armrest.

2.Set-up for Flip-back Operation

a.Disengage lever (A) so front post is able to come free.

b.Armrest now has the ability to be flipped back without removal.

3.Set-up for Removal

a.Disengage levers (A and B) so front and rear posts are able to come free.

b.Armrest can now be easily removed for transferring.

4.Height-Adjustment (option)

a.Release the upper securing lever

(C).

b.Set at desired height

c.Return securing lever to locked position.

d.Move armrest up or down to allow armrest to snap into place.

C

B

A

930486 Rev. A 30 31 930486 Rev. A