Audio Adjustments
Equalizer curve fine adjustment
You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band
HIGH).
Level (dB)
Q=2N Q=2W
Center frequency | Frequency (Hz) |
1Press AUDIO and hold until frequency and the Q factor (e.g.,
2Press AUDIO to select the desired band for adjustment.
Press AUDIO repeatedly to switch between the following bands:
3Press 2/3 to select the desired frequency. Press 2 or 3 until the desired frequency appears in the display.
LOW:
MID:
HIGH:
4Press 5/∞ to select the desired Q factor. Press 5 or ∞ until the desired Q factor appears in the display.
Note
•If you make adjustments when a curve other than CUSTOM2 is selected, CUSTOM1 curve is updated.
Section
06
Adjusting bass
You can adjust the | English | |
bass level. | ||
In FRT1 mode, bass adjustment affects only the | ||
| ||
rear output: front output cannot be adjusted. |
| |
1 Press AUDIO to select BASS. |
| |
Press AUDIO until BASS appears in the display. | Español | |
2 Select the desired frequency with 2/3. | ||
| ||
Press 2 or 3 until the desired frequency |
| |
appears in the display. |
| |
| ||
3 Press 5 or ∞ to adjust the bass level. | Deutsch | |
Each press of 5 or ∞ increases or decreases | ||
| ||
the bass level. +6 – |
| |
increased or decreased. |
| |
| Français | |
| Italiano | |
| Nederlands |
En 29