Audio Adjustments
Adjusting subwoofer settings
When the subwoofer output is on, you can adjust the
1Press AUDIO to select the subwoofer set- ting.
When the subwoofer output is on, you can select the subwoofer setting. Press AUDIO until 80Hz appears in the display.
• If the subwoofer setting has been previously adjusted, the frequency of that previously selected will be displayed, such as 50Hz or
125Hz.
2Press 2 or 3 to select
3Press 5 or ∞ to adjust the output level of the subwoofer.
Each press of 5 or ∞ increases or decreases the level of the subwoofer (e.g., +6 to
Section
06
Adjusting source levels
SLA (Source level adjustment) lets you adjust | English |
| |
the volume level of each source to prevent radi- |
|
cal changes in volume when switching between |
|
sources. |
|
•Settings are based on the volume level of the FM tuner, which remains unchanged.
1 | Compare the FM tuner volume level with | Español |
| ||
the level of the source you wish to adjust (e.g., |
| |
|
| |
2 | Press AUDIO to select SLA. |
|
Press AUDIO until SLA appears in the display.
3 Press 5 or ∞ to adjust the source volume. | Deutsch | |
| ||
Each press of 5 or ∞ increases or decreases |
| |
the source volume. |
| |
• SLA :+4 – |
| |
volume is increased or decreased. |
| |
Notes | Français | |
to the FM tuner. | ||
• Since the FM tuner volume is the control, it is |
| |
not possible to apply source level adjustments |
| |
• The AM tuner volume level can also be |
| |
adjusted with source level adjustments. |
| |
• The |
| |
both set to the same source level adjustment | Italiano | |
volume automatically. | ||
|
Nederlands
En 31