3. Setting and Adjustment During Shooting (continued)
White Balance Adjustment
Colour of light (colour temperature) may vary with light sources. When light source for illumination of object is changed, adjust white balance (AUTO WHITE) again. Do not place strong reflectors such as metals near the object. This may cause error in achieving white balance.
| [ /AW] | |
| [ | ] |
[MENU] |
| [SET] |
| AW BARS | |
| MENU | SET |
| REMOTE | LENS |
| GENLOCK IN | VIDEO OUT |
Item | Set Value | |
- - | BA LANCE - - - | |
WH I TE BA LANCE | AUTO1 | |
L EVEL ( R ) |
| 0 |
L EVEL ( B ) |
| 0 |
S H AD I NG |
| PRESET |
L EVEL ( R ) |
| - - - - - - |
L EVE L ( G ) |
| |
| - - - - - - | |
L EVEL ( B ) |
| |
| - - - - - - | |
|
| |
PAGE BACK
“WHITE BALANCE” Screen
Auto White Operation Area
AUTO W H I T E 1
O P ERA T I O N
Auto White Operation
Activated
White balance adjustment includes Auto White,
Setting procedures for Auto White (“AUTO1”,“AUTO2”)
1. Press the [MENU] button for
The “MENU” screen will be displayed.
2. Use the [
/
] buttons to select “WHITE BALANCE..”, then press the [SET] button.
The “WHITE BALANCE” screen will be displayed.
3. Use the [
/
] buttons to select “WHITE BALANCE”, then press the [SET] button.
The set value displayed will start to blink.
4. Use the [
/
] buttons to select “AUTO1” or “AUTO2”, then press the [SET] button.
5. Press the [MENU] button for
Note
Upon returning to the normal screen, place a white object with the same illumination conditions as the object, zoom in to the white portion at the center of the screen (above 80% within the area).
6. Press the [AW](Auto White) button.
●When auto white is activated, the auto white operation area and “AUTO WHITE1 OPERATION” are displayed on the monitor.
●When white balance is achieved “AUTO WHITE1 OK” will be displayed for about 3 seconds before returning to the normal screen.
AUTO W H I TE 1
O K
Auto White Operation Ends
